MMX Performance MINI F54 F55 F56 B48 Charge Pipe Kit
The MMX Performance F-Series MINI Charge Pipe Kit replaces the factory charge pipework on B48-powered MINIs with mandrel-bent aluminum. The factory pipes are plastic and can crack or split under increased boost pressure.
All three pipes are mandrel bent, which keeps the internal bore smooth and the diameter consistent through each bend. Aluminum is not subject to the failure that affects the plastic originals, and the pipes remain reliable at significantly increased outputs.
The kit is supplied complete, with seals for each connection alongside the silicone coupler hoses, C-clips and jubilee clamps. The pipes install at the factory mounting points, no cutting or modification is required, and the original pipework can be refitted at any time.
The hard pipes include a 1/8-inch bung, plugged from the factory, so a methanol or water injection system can be added later without further modification.
The finish is a crinkle black coating with laser-etched MMX logo detailing.
Product Details
- Direct replacement for the factory charge pipes on B48-powered F-Series MINIs
- Mandrel-bent aluminum construction with a smooth internal bore
- Seals included for each connection
- 1/8-inch bung for methanol or water injection, plugged from the factory
- Crinkle black finish with laser-etched MMX logo
- Installs at the factory mounting points with no cutting or modification required
- Fully reversible; the factory pipework can be refitted at any time
- Two part numbers cover the range: MMR02-1401 and MMR02-1402
What's Included
- Three aluminum charge pipes
- Two silicone coupler hoses
- O-ring gaskets
- C-clips
- Jubilee clamps
Selecting The Correct Kit
- MMR02-1401: MINI One, Cooper and Cooper S
- MMR02-1402: MINI Cooper S JCW
Vehicle Applications
Engine Fitment: B48 turbocharged MINI applications.
Which MINI engines does this kit fit?
The kit is designed for B48 turbocharged MINI applications. Two part numbers cover the range: MMR02-1401 for the One, Cooper and Cooper S, and MMR02-1402 for the Cooper S JCW. Select the variant that matches your MINI's trim.
Why replace the factory charge pipes?
The factory pipes are plastic and can crack or split under increased boost pressure. The aluminum replacements are not subject to that failure.
Is any modification required to install the kit?
No. The pipes install at the factory mounting points, no cutting is required, and the installation is fully reversible. Professional installation is recommended.
What is the bung on the hard pipes for?
The hard pipes include a 1/8-inch bung, plugged from the factory. It allows a methanol or water injection system to be added later, and should only be uncapped if one is being fitted.
What is the finish?
A crinkle black coating with laser-etched MMX logo detailing.
What warranty applies?
Includes a 1-year manufacturer warranty against defects in materials and workmanship. Designed and tested in the United Kingdom.
Emissions