Skip to product information
BMW F8X M2C M3 M4 S55 Eventuri Black Carbon Charge Pipe Set Gloss both pipes with couplers and clamps on a white background

Eventuri BMW F8X M2C M3 M4 S55 Black Carbon Charge Pipe Set - Gloss

SKU: EVE-S55-CF-CHG-G
$1,045.00

AVAILABLE TO ORDER

Pre-preg carbon fiber construction.
Direct OEM replacement for factory components.
Installs without modifications or drilling required.
Includes all required hardware for complete installation.
Designed & Engineered in the UK.
Developed for precise fitment on supported vehicles.

The Eventuri Gloss Black Carbon Charge Pipe Set for the BMW F8X M2 Competition, M2 CS, M3, and M4 has been engineered to deliver enhanced airflow efficiency, exceptional durability, and OEM-level fitment for the S55 platform. Built upon extensive research and development, these carbon charge pipes address the known limitations of factory plastic components while maintaining the premium engineering standards expected from Eventuri.

This configuration features an IND-exclusive gloss clear coat applied in-house, transforming the raw carbon construction into a striking visual centerpiece within the engine bay. The deep gloss finish highlights the carbon weave while delivering a refined OEM+ appearance suited for high-end builds.

Fitment precision was a primary focus during development. Poorly designed aftermarket charge pipes can interfere with the engine cover, contact the hood, or create clearance challenges with intake systems. By utilizing rigid pre-preg carbon fiber rather than silicone or metal, Eventuri tightly controls dimensional tolerances within the confined engine bay. The result is a charge pipe solution that integrates seamlessly with surrounding components while supporting a straightforward installation.

Leveraging their expertise in airflow management, Eventuri engineered these pipes with smooth curvature transitions from the turbo outlets to the charge-cooler. Carefully modeled internal geometry reduces turbulence, while the increased internal volume allows the turbos to operate with less restriction.

Strength is equally critical for the S55 engine, where factory plastic charge pipes are known to weaken over time, especially under higher boost pressures. Eventuri addresses this with a multi-layer, cross-directional carbon fiber weave forming an approximate 2mm wall thickness. Embedded CNC-machined stainless steel rings reinforce the clamp regions, helping the pipes retain their shape even under significant clamping loads.

IND also offers a bespoke customization option, allowing the raised “V” logos on the charge pipes to be professionally painted in your choice of color. This exclusive detail creates a tailored OEM+ aesthetic and provides the opportunity to coordinate with factory paintwork, brake calipers, or other engine bay accents.

Please note that while the gloss finish delivers a premium visual upgrade, extended exposure to high engine bay temperatures may lead to yellowing over time. For vehicles subjected to repeated track use, the matte version is recommended.

Product Details

  • Fits BMW F87 M2 Competition / M2 CS, F80 M3 / M3 CS, F82 M4 / M4 CS, and F83 M4 with the S55 engine
  • IND-exclusive gloss clear coat applied in-house
  • Constructed from high-temperature pre-preg carbon fiber
  • Smooth internal geometry reduces turbulence and improves airflow efficiency
  • Increased internal volume supports higher airflow demand
  • Multi-layer carbon construction with approximately 2mm wall thickness for enhanced durability
  • Embedded CNC-machined stainless steel rings reinforce clamp regions
  • CNC-machined turbo flanges for precise fitment
  • OEM-like fitment engineered to prevent interference with engine covers and surrounding components
  • Optional IND-exclusive painted “V” logo for a custom OEM+ aesthetic
  • Silicone couplers with oil-resistant lining
  • Marine-grade stainless steel hose clamps
Construction High-temperature prepreg carbon fiber with an IND gloss clear coat over Eventuri's raw carbon finish, cross-directional multilayer layup, and 2mm wall thickness.
Strength CNC machined stainless steel rings embedded into the clamp openings, with CNC machined turbo flanges.
Supplied Two carbon charge pipes, two CNC machined turbo flanges, silicone couplers with oil-resistant lining, and marine grade stainless steel hose clamps.
Eventuri gloss carbon charge pipes installed in a BMW F8X engine bay with IND painted V logos

Engineered by Eventuri, Finished by IND

Eventuri developed the S55 charge pipes against three criteria: fitment, flow quality and strength. Carbon fiber allows complex curves that clear the engine cover and aftermarket intakes in a tight bay. Machined flanges hold a constant diameter from the turbo outlet, with no exposed edges in the flow path. IND then applies a gloss clear coat in-house over Eventuri's standard raw carbon, bringing the weave forward without altering the construction underneath.

Carbon in Place of the Plastic

The Eventuri set replaces both factory charge pipes between the turbochargers and the charge cooler with molded carbon fiber. A 2mm cross-directional layup with embedded stainless steel rings reinforces the clamping areas, CNC machined flanges meet the turbo outlets on the factory O-rings, and oil-resistant silicone couplers and stainless clamps complete the set.

BMW F8X M3 M4 F87 M2 Competition S55 Eventuri gloss carbon charge pipes, both pipes showing the molded curve

Carbon Geometry

Molding the pipes in carbon fiber let Eventuri shape them with complex curves rather than simple bends. That is what holds OEM-like fitment in a tight engine bay, clearing the engine cover and aftermarket intake systems while keeping the flow path smooth from the turbo outlet to the charge cooler.
BMW F8X M3 M4 F87 M2 Competition S55 Eventuri carbon charge pipe set, CNC machined turbo outlet flanges

CNC Machined Turbo Flanges

The machined flange meets the turbo outlet and carries a constant diameter into the pipe, with no exposed edges to disturb the air. The factory O-rings transfer across to these flanges and form the seal.
BMW F8X M3 M4 F87 M2 Competition S55 Eventuri gloss carbon charge pipes, embedded stainless steel rings

2mm Wall and Embedded Steel Rings

Factory charge pipes are a known failure point on S55 cars running raised boost. Eventuri builds a 2mm wall from a cross-directional carbon weave laid up in multiple layers, and embeds CNC machined stainless steel rings into the openings where the clamps tighten, reinforcing these areas against clamping forces.
BMW F8X M3 M4 F87 M2 Competition S55 Eventuri carbon charge pipe set, silicone couplers, stainless clamps and machined flanges

Couplers and Clamps Included

Silicone couplers with an oil-resistant lining join the pipes to the flanges and the charge cooler, held by marine grade stainless steel hose clamps. The couplers are handed, with a tapered edge that seats down onto the flange, and the kit includes the spacer washer the engine cover mount needs on reassembly.
BMW F8X M2C M3 M4 S55 Eventuri Black Carbon Charge Pipe Set Gloss both pipes with couplers and clamps on a white background

Ask a Question