Ohlins E9X M3 Dedicated Track Monotube Suspension Package
The Öhlins Dedicated Track Monotube Suspension Package for the BMW M3 (E9X) is a pre-tuned, bolt-on track suspension system built for drivers who demand circuit-ready performance straight from the box. Developed using Öhlins' Dual Flow Valve (DFV) technology and paired with Swift springs manufactured to Öhlins specifications, this package delivers precise, repeatable handling at the limit. Each application is shake-rig developed and track validated, with specific spring rates, damper click settings, and ride height specifications established to suit the chassis — no guesswork required at the track.
The DFV system allows fluid to flow efficiently in both compression and rebound phases. At low shaft speeds, fluid passes through the bleed circuit for controlled damping. As shaft speed increases, flow transitions through the piston ports, and under high load or sudden impacts, the DFV opens to allow additional flow. This results in improved bump absorption, increased traction, and reduced harshness — critical for maintaining speed and consistency through extended track sessions.
Öhlins' temperature-reactive needle bleed valve compensates for changes in fluid viscosity as damper temperatures rise during sustained track use. This ensures predictable handling and repeatable lap times, even in the most demanding conditions.
Ride height is set to a target reduction of approximately 15mm front and 10mm rear from factory height, providing an optimal platform for track alignment without excessive lowering that could compromise suspension travel.
Product Details
- SKU: BMU MU40S1
- Öhlins Dual Flow Valve (DFV) technology
- Single external adjuster controlling compression and rebound; 0–7 clicks recommended for track use
- Target ride height reduction: approximately 15mm front, 10mm rear
- Spring rates: 120 N/mm front, 180 N/mm rear (Swift, manufactured to Öhlins specifications)
- Monotube damper construction
- Rebuildable and serviceable dampers
- Pre-tuned for dedicated track use
Front Suspension Features
- McPherson strut design with inverted monotube construction
- Spring preload adjustment
- Height adjustable via lower perch
Rear Suspension Features
- Aluminum monotube shock absorber
- Spring preload adjustment
- Independent ride height adjustment
Vehicle Applications
- BMW M3 (E90)
- BMW M3 (E92 / E93)
Technical Resources
Notes
- Suspension components are non-returnable once installed
- The BMW E9X M3 was not equipped with factory electronic dampers — no cancellation kit is required