CSF G-Chassis / A9X Supra (B48 / B58) High Performance Transmission Oil Cooler
CSF High-Performance Transmission Oil Cooler (CSF #8183):
- 5.4mm Tall Multi-Louvered Fin vs. OEM 7mm
- Made with CSF’s AC Condenser Technology Using a 1-Row Super-High Pressure 16mm 9-Channel Microtube for Optimal Oil Flow and Maximum Surface Area Contact
- 129mm Overall Height vs. OEM 125mm Allows for Maximum Performance Without Increasing Overall Surface Area or Blocking Airflow to Rest of Cooling System
- Utilizes OEM Top/Bottom Rubber Seals for Optimal Airflow
- OEM Style “Quick Connect” Inlet/Outlet Connections
- Drop-in Fit Requires No Modifications to Install
- Can be Installed With CSF’s High-Performance Heat Exchanger (CSF #8154) or with the OEM Cooling System
- 2-Year Limited Warranty
- Ideal for Road Racing, Drag Racing, and Vehicles With Increased Performance and/or Transmission Tuning
Dual-Core Advantage
- 240% Increase in Core Volume
- 130% Increase in Fluid Capacity Compared to OEM (CSF 550ml vs. OEM ~240ml)
- Two 16mm Stacked Cores = 32mm Core Width (44mm Overall Width) vs. OEM 15mm Core Width
- Rear Cooler: 15 Rows vs. OEM 12 Rows
- Front Cooler: Additional 12 Rows
Applications:
- 2020+ Toyota Supra (A90/A91)
- 2018+ BMW G29 Z4 M40i
- 2022+ BMW G42 2-Series (M240iX)
- 2018+ BMW G20 3-Series (330e, M340i, M340iX)
- Replaces OEM Part#: 32910-WAA02 (Toyota) and 17219494828 (BMW)
- Toyota Supra (A90 / A91) (2020+)
- BMW G29 Z4 M40i (2018+)
- BMW G42 2-Series - M240iX (2022+)
- BMW G20 3-Series - 330e, M340i, M340iX (2018+)
What is the warranty?
This cooler is covered by a 2-year limited warranty against defects in materials and workmanship, to the original purchaser of the vehicle in which it was installed.
Does installation require modification?
No. It is a drop-in fit that requires no modifications, uses the OEM top and bottom rubber seals for optimal airflow, and retains OEM-style quick-connect inlet and outlet connections.
How much bigger is it than the factory cooler?
Core volume rises by 240% and fluid capacity by 130% - 550ml against the OEM figure of roughly 240ml. Two 16mm stacked cores give 32mm of core width, 44mm overall, against the OEM 15mm. The rear cooler runs 15 rows against the OEM 12, and the front cooler adds a further 12.
Will it block airflow to the rest of the cooling system?
No. Overall height is 129mm against the OEM 125mm, so the extra capacity comes without increasing frontal surface area or restricting airflow to the rest of the cooling system.
Which factory parts does it replace?
Toyota part number 32910-WAA02 and BMW part number 17219494828. It can be installed with CSF's high-performance heat exchanger (CSF #8154) or with the OEM cooling system.