ESS E9X M3 VT2-650 Supercharger System
Featuring the newly developed, self contained Vortech V3 supercharger unit in Si trim which is capable of up to 775hp.
The E9x M3 VT2-650 supercharger system comes with a high capacity liquid intercooler system and especially developed cast aluminum manifold assembly with integrated heat exchanger. It also features a custom crankshaft pulley system specific for the VT2-650 version.
The supercharger system includes redesigned ESS MSS60 engine control software that is perfectly calibrated for the supercharged engine providing optimum ignition timing under all conditions, recalibrated EGA's for quicker throttle response, recalibrated VANOS control and perfectly optimized fuel delivery supplied by 8 larger Bosch Motorsport injectors.
ESS' supercharger kits for the E9x M3 maintain a smooth and linear power delivery throughout the RPM range, with flawless driveability at low throttle opening and absolutely brutal acceleration at wide open throttle.
The system maintains all OBD-II functions and it is backed by a comprehensive 2 year, unlimited mileage warranty program. The system installs in 8-14 hours using normal hand tools and no irreversible modifications to the car is necessary.
The ESS E-Flash OBD2 cable in included. This allows the end user to upload the supercharger ECU software directly to the car from any PC running Windows XP or newer. The system also includes full diagnostic and code clearing capability. Any future ESS software updates can be received by email and loaded directly to the car. The stock ECU software will be saved and can easily be restored in the future.
-No-cat mid section required.
-Vortech V3Si supercharger unit.
-Vortech Maxflow Race bypass assembly.
-Uni-belt drive system with additional OEM quality rollers rated for 100.000+ miles between service intervals.
-Uprated ESS VT2-650 specific VT2-650 crankshaft pulley.
-8 High Capacity Bosch Motorsport fuel injectors (Spec 3).
-Perfectly optimized, dyno tweaked VT2-650 spec MSS60 ECU software with removed top speed governor, calibrated for VT2-650 injectors.
-CNC hard anodized brackets and hardware.
-K&N high flow air filter with all weather protection.
-High temperature casted plastic intake system for SC.
-High capacity liquid intercooler system (VT2 only).
-Cast aluminium ESS intake manifold with integrated light weight velocity stacks especially developed for the VT2-650.
-High temperature silicone hoses with clamps.
-Detailed, step-by-step installation manual.
-Heavy-Duty drive belt.
-ESS oil breather assembly designed for boost.
-All installation hardware included.
-2yr./unlimited mileage warranty.
-ESS E-Flash reprogramming and diagnostic system.
Installation time : 10-16 hours
VT2-650 specs :
Boost pressure: 8 PSI
Horsepower: 650 SAE (~56% gain over stock)
Correction factor for drivetrain loss is 15% above RWHP as seen in dynograph (RWHP/0.85)
Application intended for: E90 M3, E91 M3, E92 M3 from 2007 2008 2009 2010 2011 2012 2013, 2007-2009MY cars require update of rod bearings to new BMW specification before installation of this kit.
Legal in California only for racing vehicles.
IND Distribution nor any of its subsidiaries make any representation that the products comply with the air and/or noise emissions laws, or labeling laws, of any jurisdiction. The purchasers are entirely responsible for informing themselves of the applicable laws where the products are to be used and to comply with those law.
EMISSIONS WARNING / USA:
Various U.S. states and the U.S. federal government have individual laws regulating the use of aftermarket exhaust parts and systems, especially as those parts and systems modify, remove, or replace original equipment catalysts. Please consult the appropriate laws in your area before installing any aftermarket part or system on your vehicle to ensure compliance with all applicable laws. Neither IND Distribution nor any of their subsidiaries or the sellers of the parts or systems make any representation that any of their parts or systems comply with any such laws.
EMISSIONS WARNING / California:
California laws prohibit the use of any aftermarket exhaust part or system that modifies, removes or replaces original equipment catalysts unless the California Air Resources Board (C.A.R.B.) has issued an Executive Order regarding such part or system or unless the part or system is exempted by being used only on racing vehicles on closed courses. IND Distribution nor any of their subsidiaries make any representation that any of their parts or systems has received such an Executive Order or that any of their parts or systems conform to the racing vehicles exemption. The purchasers are entirely responsible for informing themselves of applicable California laws and to comply with those laws.